User guide

13
UWATEC
®
SmartTRAK
English
The following parameters can be changed:
Parameter
Metric or imperial
units
Attention beeps
Premix reset after
Meaning
This changes the dive computer pressure units (bar or psi), depth
units (meters or feet) and the temperature (Celsius or Fahrenheit).
You can turn all the warning sounds on and off together or set
some specific warnings on and off individually.
You can set the time after which the dive computer automatically
resets the oxygen fraction back to 21%.
Parameter
Tank reserve
Tank warning
Work sensitivity
Meaning
Gas reserve for the RBT calculation.
When the tank pressure reaches the set warning pressure an alarm
goes off.
Sensitivity of the increased gas consumption warning.
Parameter
Gauge mode
Maximum Depth
ppO
2
Backlight
Meaning
In gauge mode the computer shows only depth and time. No decom-
pression calculation is performed in the computer.
The depth limit at which the computer gives a warning.
The maximum allowed partial pressure of oxygen.
You can configure the duration of the backlight. Increasing the value
means consuming more battery power and shortening the time
before the next battery exchange.
In addition, for gas integrated computers only:
On some models, the following parameters can be changed: