User guide

12
UWATEC
®
SmartTRAK
2.3.3 Show Temperature Profile/Show Workload Profile
This option allows you to toggle between the two profiles on the display.
2.3.4 Dive Computer Settings
Via the Options/Dive Computer Settings window you can change many of the settings in
the dive computer and read the ID and version numbers.
You can access this window only if you have established an IrDA connection between your dive
computer and PC (section 5.2).
Parameter
Smart ID
Hardware revision
Software version
# Dives
Dive time
Amb. pressure
Battery
Meaning
This is a number unique to your computer.
The hardware revision identifies the electronics and the components.
Shows the version of the software running on the computer.
Total number of dives.
Total dive time with this dive computer.
Ambient air pressure.
This is an estimated value of the remaining power in the battery.
If the remaining charge is low, consider replacing the battery.
The following information is displayed:
Changes to settings take
effect only after you push the
“write settings to dive
computer” button.