User guide

Depth
Pressure
Temperature
Volume
Weight
Coordinate
10
UWATEC
®
SmartTRAK
2.2.9 Dive Template
The dive template lets you define a dive from which settings are copied whenever you insert a
new dive or you transfer dives from the dive computer.
Following settings are copied:
• Dive site information: location, site, etc.
• Conditions / Weather
• Conditions / Surface
• Conditions / Air Temperature
• Conditions / Underwater
• Conditions / Visibility
• Gear / Weight
• Gear / Suit
• Tank information: size, type, etc.
• All DAN settings
In the Dives/Dive Template window you can turn the dive template feature on or off. Or you
can choose the dive that is used as template.
2.2.10 Adjust Time Zone
Y
ou can correct the date and time of your dive(s) after reading them from your dive computer.
This feature is meant to be used if you have been diving in a different time zone than usual.
Select the dive(s) you would like to update. Choose Dives/Adjust Time Zone and enter how
many days, hours and minutes that should be added or subtracted.
2.3 Options
2.3.1 Units
The units used by SmartTRAK are configurable and can be changed on
the fly.
You can change the following units in SmartTRAK:
The settings are saved when you exit the program.
SI-units
[metre]
[bar]
[Celsius]
[Litre]
[kg]
ddºmm.mmm’
Imperial units
[foot]
[psi]
[Fahrenheit]
[Cft]
[Lbs]
ddºmm’ss.ss”