User manual

25
English
CHROMIS USER MANUAL
By pressing the SEL button the following
menu’s can be accessed.
4.4.1 Setting the dual depth alarm
By pressing the SEL button at this menu
the on/off selection starts blinking. By
pressing + or - button this can be edited
and confirmed by pressing SEL button.
After that the first depth starts blinking.
By pressing + or - buttons you may select
the first depth alarm from 5 to 100 meters
(20..330 feet). By pressing SEL the first
value is confirmed and the second depth
starts blinking. Like the first, by pressing +
or - buttons the second depth alarm may
be set from 5 to 100 meters.
)
NOTE: The rst alarm is short
sequence for attention and the second
alarm is continuous. By setting the rst
alarm deeper than the second, it will
be masked by the continuous alarm
and you cannot hear the rst one.
4.4.2 Setting the depth
incremental alarm
By pressing the SEL button in this menu
the incremental mode starts blinking. By
pressing + or - the you may scroll between
the direction of the alarm or disable it with
selections: off, dn(down), up or both. After
confirming the selection with SEL button
the alarm depth starts blinking. By pressing
+ or - buttons you may select the alarm
value from 5 to 100 meters (20..330 feet).
By pressing SEL button the alarm value will
be confirmed.
4.4.3 Setting the dive time interval
alarm
By pressing SEL button at this menu the
function starts blinking and you may enable
or disable it by choosing on/off with + or
- buttons. After confirming by pressing
the SEL button the time starts blinking. By
pressing + or - you can select the interval
from 15 seconds up to 10 minutes. By
pressing SEL again the selection will be
confirmed.