Technical information

7
II UWATEC
®
Aladin
®
ONE
English
II System and operation
II
Setting
• Setting the gas mixture
• Time limit to reset the O
2
% mix to air
• Unit system
• Reset desaturation
• UTC (Universal Time Change) zone
• Time of day
• 24 or AM/PM setting
• Date
• Display contrast
2.2 SmartTRAK
You must use SmartTRAK to configure Aladin
®
ONE , transfer dive data to a personal computer and graphically
display the data. To start the communication, place
Aladin
®
ONE so that its infrared window is in front of the
infrared interface, then select "Dive Computer Settings" under "OPTIONS" on the main menu bar.
If Aladin
®
ONE detects an infrared device within range appears.
The following settings may be changed with SmartTRAK
:
Range
21-50% O
2
no reset / 1 - 48 hrs.
metric/imperial
on / off
±13 hrs., increments: 15 min.
hours:minutes
1 (low) -12 (high)
Default
21% O
2
no reset
no reset
GMT
4
Page
->11
->12
->8
• Number of past dives
• Total duration of dives
• Deepest dive
• Longest dive
• Atmospheric pressure
• Dive profile
• Logbook
• Temperature curve
• Alarms and attention messages
• Battery condition
The following data may be recalled with SmartTRAK:
When making any changes to the settings via SmartTRAK, you must press the "Write" icon for the changes
to take effect.