Technical information

II System and operation

UWATEC

Smart dive computers

2.2 SmartTRAK

With SmartTRAK you can transfer dive data to a personal computer and graphically display the data.

The following settings may be changed with SmartTRAK:

• Unit system metric/imperial

• Audible attention signal suppression selective

• Gauge mode on / off

• Depth alarm 5 - 100 m (20 - 330 feet)

• Backlight illumination duration 2-12 sec.

• Maximum partial pressure of oxygen (ppO

2 max

) 1-1.95 bar

• Time limit to reset the O

% mix to air no reset / 1 - 48 hrs.

• Minimum reserve pressure at the end

of the dive (basis for RBT calculation) 20 – 120 bar (300 - 1750 psi)

• Tank pressure alarm 50 - 200 bar (750 - 2900 psi)

• Workload sensitivity 25 steps

The following data may be recalled with SmartTRAK:

• Number of past dives

• Total duration of past dives

• Atmospheric pressure

• Pairing information

• Dive profile

• Logbook

• Temperature curve

• Workload curve

• Alarms and attention messages

English