Technical information

31
VII Logbook
UWATEC
®
Smart dive computers
English
VII
1 Survey
A dive is entered in the logbook if the dive time is longer than 2 minutes. Smart PRO records dive profiles
of about 100 hours of diving and Smart COM records the profiles of about 50 hours. This information can
be transferred to a PC with the standard infrared interface (IrDA) and the Windows
®
software SmartTRAK.
Up to 99 dives can be displayed directly on the dive computer.
The following information of the dive is displayed:
If a dive is started within adaptation time (after a change of altitude), the
adaptation time is displayed instead of the surface interval.
*Alarms during the dive
Altitude range (if any)
Maximum depth
Dive time
Dive number
Duration of surface
interval (only
with repetitive dives)
O
2
Mix
MB level reduced*
Logbook icon
Lowest temperature
DIVE TIME
DEPTH
DECO INFO
MAX.DEPTH
CNS O
2
%
LOG
h
DECO
S
L
O
W
%
%
C
Ignored decompression stop *
Too fast ascent*
2 Operation
With the contacts B and + or B and – you can select the logbook. With B and
E you enter the logbook.
If there was a remaining desaturation time (DESAT)
before selecting the logbook, the time since the last
dive (surface interval) is displayed.
With B and E you get the most recent dive displayed (LOG 1).
Each bridging of B and + or B and – causes a jump to the next older or more
recent dive. Upon continuous bridging of the contacts all dives are displayed
successively.
With the contacts B and E you can exit the logbook.
The logbook closes automatically after 3 minutes without operation.
DECO INFO
MAX.DEPTH
DIVE TIME
DEPTH
DECO INFO
MAX.DEPTH
h
DIVE TIME
DEPTH
DECO INFO
MAX.DEPTH
LOG
%
C
TANK DATA
RBT
bar
Gas consumed during
this dive
dP = differential
Pressure (bar or psi)
Increased workload warning*
COM
CNS value at the end of the dive
RBT
warning*
if rep. dive
Diving in SOS mode