Technical information

23
2 Terminology
UWATEC
®
Smart dive computers
English
IV
This chapter will exclusively deal with terminology and display features used while diving with MB levels.
All other features are described in chapter III (->11).
2.1 Display during microbubble (MB) no-stop phase
Dive time
MB no-stop time
21min
Current depth
Maximum depth
29.9 m
Level stop phase
MB no-stop phase
Dive phase during which surfacing is possible
without MB level stop.
Time
Depth
DIVE TIME
DEPTH
DECO INFO
MAX.DEPTH
CNS O
2
%
NO STOP
%
%
C
An MB level
between
L1 and L5
was chosen.
MB no-stop time
Remaining time at a
respective depth allowing
ascent without level stop
.
2.2 Display during level stop phase
Lowest level
stop depth
Total ascent time (14 min)
3 min
Level stop duration
9m/30ft
35.7m
6m/20ft
3m/10ft
Levelstop phase
To complete the dive without being
reduced to a lower MB level all
requested level stops must be
observed.
MB no-stop phase
Time
Depth
DIVE TIME
DEPTH
DECO INFO
MAX.DEPTH
CNS O
2
%
m
LEVELSTOP
%
%
C
Level stop duration
The duration of a level
stop at a given level
stop depth is displayed.
Level stop depth
The deepest level stop
depth is displayed.
Total ascent time
including level stops