Instruction Manual
TB-9007 Page 4 of 4
© 2022 DESCO INDUSTRIES INC
Employee Owned
SCS - 926 JR Industrial Drive, Sanford, NC 27332
East: (919) 718-0000 | West: (909) 627-9634 • Website: StaticControl.com
Specifications
Input Voltage and
Frequency
AC Power Adapter
Power Input:
100-240VAC, 50/60 Hz
Power Output:
24VDC, 1.0-1.5A
Power Consumption 10 W
Dimensions
(including stand)
9" H x 8.5" W x 4.5" D
(23 cm x 22 cm x 11 cm)
Weight 2.5 lbs (1.1 kg)
Balance (Oset
Voltage) at 12"
±15V
Neutralization
(Discharge) Time at 12"
< 2 seconds
Maximum Airow 112 CFM
Emitter Points Tungsten
Ozone <0.005 ppm
Certications cULus, CE
Country of Origin China
Regulatory Information
FCC
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found
to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide a reasonable protection against
harmful interference when the equipment is operated in
a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference
in which case the user will be required to correct the
interference at their own expense.
NOTE: Modifications to this device shall not be made
without the written consent of SCS. Unauthorized
modifications may void the authority granted under
Federal Communication Rules and Industry Canada
Rules permitting the operation of this device.
ICES Statement
This Class A digital apparatus meets all requirements
of the Canadian Interference-Causing Equipment
Regulations. Cet appareil numérique de la classe A
respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada.
WEEE Statement
The following information is only for EU-member States:
The mark shown to the right is in compliance with Waste
Electrical and Electronic Equipment Directive 2002/96/
EC (WEEE). The mark indicates the requirement NOT
to dispose the equipment as unsorted municipal waste,
but use the return and collection systems according to
local law.
CE Statement
Meets EU safety, health and environmental protection
requirements.
UL Statement
Meets UL requirements.
Limited Warranty, Warranty Exclusions, Limit
of Liability and RMA Request Instructions
See the SCS Warranty -
StaticControl.com/Limited-Warranty.aspx