Instruction Manual

4. When turn on open-window detection and weekly program at the same time, during the OFF period

of weekly program, the product doesn’t work. During the working status of weekly program, the

temperature is subject to the setting temperature of open-window detection. Below is a example

(Figure I).

H I

Note: Before turn on weekly program: it must set working day and time period (P1-P6), otherwise the weekly

default state is “00”, the product does not work.

02 Remote Control

The remote control requires 1 CR2025 3V lithium battery (not included)

Important: Follow the instructions of use and the recycle rules given on the battery packaging.

1. Open the battery compartment by sliding the cover down.

2. Insert the battery into the compartgram (see below drawing).

3. Close the battery compartment.The remote controller control can be normally used within 3 meters in

front of the product and in the left and right angles of 60 degrees

CR2025

Open

Push