Instruction Manual

51
4. Set timer-on time when appliance is in standby status, press “
” button, you can set the appointment
turn-on time in 00-12 hours. After complete setting, the display shows the appointment turn-on time,
the timer light “ ” is o󰀨. The display automatically decreases 1 hour for each hour passed. When the
appointment turn-on time arrived, the product will automatically turn on. The default setting temperature
is 23°C during appointment turn-on. Below photo is an example to set appointment turn-on time to
8 hours.
Note: If not setting the temperature and weekly program, the product will automatically turn o󰀨 after 12 hours
of continuous work.
Function operation (ONLY by remote control)
1. Press , the unit switch on, enter into fan mode and the display show “--”(photo A) Press “ ” button,
Press rst time , the product works in low heating and display shows like photo B , light, Press second
time, changes to high heating and display shows like photo C “ ” “ ” the two light together, then Press
third time, enter into in standby mode and display shows “--”, like photo A, still in cool fan, it can’t stop
after 30s and enter into standby mode.
A B C