Instruction Manual

50
Function operation (both control panel & remote control)
1. Plug in and switch on by pressing the red switch 0/I, product enter into standby mode and display
shows“S”.
2. Press “F” button one time, enter into fan mode and the display show “--”(photo A) . Press second time,
the product works in low heating and display shows like photo B Press third time, changes to high
heating and display shows like photo C, then Press fourth time, enter into in standby mode and display
shows “S”, like photo in above 1st the cool fan will work for 30seconds and enter into standby mode.
A B C
3. Set timer-o󰀨 when appliance is in working status, press “ ” button to set timer (00-12hours). Pressing
the “ ” button one time increases one hour for timer. After setting time, the display will show current
setting time for 5 seconds, then resume to previous display, meanwhile the light of “ ” is on. Below
photo is an example of setting 8h.