User Guide

 Interface: This is the interface on which the Remote receiver connects to the

MultiBeam cluster.

Wired Ethernet: It refers to the Ethernet connection through which the Remote

receiver connects to a network. The Primary receiver must connect to the same

network with the Remote receiver via its Ethernet or wireless connection when a

Remote receiver’s MultiBeam Interface is set to Wired Ethernet.

Wifi Direct: After the MultiBeam feature is enabled, a hidden AP is created on the

Primary receiver, and the Remote receiver will connect to this hidden AP by

wireless when MultiBeam Interface is set to Wifi Direct.

If your Infrastructure network is robust and stable, it is highly recommended to use

the Wired Ethernet connection. Compared to the Wifi Direct method, the Wired

Ethernet method can support more Remote receivers.