Specification Sheet

©2021 ScreenBeam Inc., ScreenBeam and the ScreenBeam logo are trademarks or registered trademarks of ScreenBeam Inc. in the U.S. and/or other countries.
All other names or marks referenced are the names or marks of their respective owners.
- Coax outlets and Coaxial wiring must all be part of the same coax system. Certain coax conditions in your home, such as wiring conditions and conguration may
effect the performance of this product. A minimum of two ScreenBeam Coax Network Adapters are required to create a network, unless the user has a modem,
router or gateway with MoCA 2.5 or below built in.
- ScreenBeam makes no express or implied representations or warranties about this product’s compatibility with any future standards.
- Product photo may differ from actual product, however functionality remains as stated above.
- Specications are subject to change without notice.
Specications
RF Interface
– Connector: F-type
– Impedance: 75 Ω
Coax In Frequency Range
– Extended D-band: 1125 ~ 1675MHz
Transmit Power
– Max: 9 dBm
– Typical: +1 to +9 dBm
Throughput (Uni Direction)
– up to 2.5 Gbps
Network Size
– 16 Devices (including NC)
Ethernet Interface
– Connector Type: RJ45
– Conguration: One Port
– One 10/100/1000 Base-T 802.3ab
MoCA Version
– MoCA 2.5
– Backward Compatible with MoCA 1.0/1.1/2.0
Link Delay
– Typical: 3.6 ms
– Max: 6.3 ms
Power Adapter
– Input 100-240V @0.6A
– Output 5VDC @2.0A
Environmental Conditions
– Ambient Temperature Range: 0 - 40°C
– Storage Temperature Range: -20 - 85 °C
– Operating Humidity: 10% - 85% Non-condensing
Regulatory Approvals/
Certications
– FCC 15B
– UL, cUL 60950-1
– RoHS
– SNE
www.screenbeam.com
PN 0535-0107-000