User Guide

You will be asked to login. The user name is “admin" and the password is
“actiontec”. Once you have enabled MoCA encryption, you can use the
MPS push button to synchronize the encryption password on each MoCA
2.5 adapter connected via coaxial cable.
Using a Coaxial Splitter
If the coaxial port is already being used by another device (a set-top
box, for example), follow these steps:
1. Disconnect the coaxial cable from the connected device. Leave
the other end connected to the coaxial wall outlet.
2. Get a 2-way coaxial splitter (not included).
3. Connect the coaxial cable disconnected in step 1 to the single
(“In”) port on the coaxial splitter.
4. Connect a coaxial cable (not included) to one of the dual (“Out”)
ports on the coaxial splitter.
5. Connect the other end of the coaxial cable from step 4 to the
coaxial port on the device (disconnected in step 1).
6. Connect another coaxial cable (not included) to one of the dual
(“Out”) ports on the coaxial splitter.
7. Connect the other end of the coaxial cable from step 6 to the coaxial
port of the Adapter.
When complete, the setup should look similar to the inset diagram in the
figure on the preceding page.
6User Guide | Bonded MoCA Network Adapter | Model # ECB6250
Connecting the Adapters