User's Manual

Screen Service SDT ARK 1 ECHO Operations
Jan, 2012 v 1.ATSC_FCC Page 3 - 54
The following buttons allow the management of linear pre-correction files and the
management of the connection to port 5000:
 Save: used to save in the device memory the current curves setting. The previously
saved file will be overwritten except in the evet that no files have been saved before;
in this case a dedicated window appears in order to let the user name the new file.
 Save as: used to save in the device memory the current curves setting. The
previously saved file will be overwritten with a new name. in the evet that no files
have been saved before, a new file will be created.
 Read file: used to reload the last saved file.
 Export: used to download pre-correction files on the user PC. A browser window
allows the selection of the saving path.
 Release: release the connection in order to allow others remote machines to
connect to port 5000 (refer to Connection to port 5000 paragraph).
Files are separately managed in analog and in digital AGC mode.