User's Manual

Screen Service SDT 200UB – SDT 500UB ARK-1 ATSC Operations
July, 2009 v 1.0 Page 3 - 35
The configuration of traps is performed through the setting of a trap alarm mask, by means
of leaves housed in the ark1atsc_AlarmTrap node (refer to Configuring alarms paragraph),
and through the setting of the destination IP Address of the receiving management stations,
by means of leaves housed in the ark1atsc_Network node as shown in next figure.
Fig. 6:Configuring traps
Fig. 7:SNMP Trap Message