User's Manual Part 3

Screen Service SDT 501 UB-C ARK 1-T Operations
May, 2010 v 1.0 Page 3 - 98
Alarm Description and limitations Troubleshooting
Late MIP input alarm
Seamless improper working warning
This alarm is high when the MIP in one of the seamless
inputs of the current mode, is not in its expected position.
This can be caused by a too high delay on the input.
• Check cable connections
• Check Network delay
• Hardware Fault
Network delay alarm
Seamless improper working warning
This alarm is high when the Network delay parameter,
calculated from parameters extracted by a seamless inputs is
greater than the Maximum delay parameter, extracted from
its MIP
The alarm can be visualized when LATE MIP input 1 alarm is
not high.
• Check cable connections
• Check Network delay
• Hardware Fault
Not Used This alarm isn’t used
File System Error File System loading error.
• File system partition damage