User's Manual Part 3

Screen Service SDT 501 UB-C ARK 1-T Operations
May, 2010 v 1.0 Page 3 - 70
Box
Parameter /
Control
Description Admitted Ranges / Values
RF
Internal Freq.
Ref. Tune
Internal frequency reference fine tuning setting. Allows the fine tuning of VCO, internal clock oscillator,
with 60 Hz steps.
• Min: 0
• Max: 255
AGC AGC ON AGC status.
• Green: ON
• Grey: OFF
AGC Mode Current AGC mode indicator. It is always digital.
• Analog/Digital:
o Green: ON
o Grey: OFF
Frequency
Out [Hz]
Frequency
Out [Hz]
Shows the output center frequency expressed in Hz.