User's Manual Part 3

Screen Service SDT 501 UB-C ARK 1-T Operations
May, 2010 v 1.0 Page 3 - 149
OID Name R/W Description
1.3.6.1.4.1.21678.188.6.7.2.2 ark1t_mipAntennaGain
NOT
IMPLEMENTED
(Mip antenna gain)
1.3.6.1.4.1.21678.188.7 ark1t_HW_monitor
1.3.6.1.4.1.21678.188.7.1 ark1t_HW_monitor_RflPowerDbm R
Reflex power
[dBm x 10]
1.3.6.1.4.1.21678.188.7.2 ark1t_HW_monitor_Amplifier R
Amplifier status
0: on 1: off 2:
restart 3: standby
off 4: GPS off 5:
init 6: alarm off
7: rf off 8: opto off
9: change mode
1.3.6.1.4.1.21678.188.7.3 ark1t_HW_monitor_CurrentOut R
Current indicator
(mA) 28/42V
1.3.6.1.4.1.21678.188.7.4 ark1t_HW_monitor_PowerSupply R
Voltage indicator
(mV): 28V for 20W
and 50W versions,
and 42V for
200/500W version
1.3.6.1.4.1.21678.188.7.5 ark1t_HW_monitor_PowerSupply24V R
24V voltage
indicator (mV),
only in 200/500W
version
1.3.6.1.4.1.21678.188.7.6 ark1t_HW_monitor_FanPulse
1.3.6.1.4.1.21678.188.7.6.1 ark1t_FanSpeed1 R
FAN 1 speed
(rpm)
1.3.6.1.4.1.21678.188.7.6.2 ark1t_FanSpeed2 R
FAN 2 speed
(rpm)
1.3.6.1.4.1.21678.188.7.6.3 ark1t_FanSpeed3 R
FAN 3 speed
(rpm) - only for
200W/500W
version
1.3.6.1.4.1.21678.188.7.6.4 ark1t_FanSpeed4 R
FAN 4 speed
(rpm) - only for
200W/500W
version
1.3.6.1.4.1.21678.188.7.7 ark1t_HW_monitor_Temperature
1.3.6.1.4.1.21678.188.7.7.1 ark1t_TemperatureCase R Case temperature
1.3.6.1.4.1.21678.188.7.7.2 ark1t_TemperaturePsu R PSU temperature
1.3.6.1.4.1.21678.188.7.7.3 ark1t_TemperatureCase2 R
Case temperature
2 (only in SDTX
200/300 version)
1.3.6.1.4.1.21678.188.7.8 ark1t_HW_monitor_Relays
1.3.6.1.4.1.21678.188.7.8.1 ark1t_Relay0Status R
Relay 0 status 0:
on 1: off
1.3.6.1.4.1.21678.188.7.8.2 ark1t_Relay1Status R
Relay 1 status 0:
on 1: off
1.3.6.1.4.1.21678.188.7.8.3 ark1t_Relay2Status R
Relay 2 status 0:
on 1: off
1.3.6.1.4.1.21678.188.7.8.4 ark1t_Relay3Status R
Relay 3 status 0:
on 1: off
1.3.6.1.4.1.21678.188.7.9 ark1t_HW_monitor_Opto
1.3.6.1.4.1.21678.188.7.9.1 ark1t_Opto0Status R
Opto 0 status (RF
Off): if closed the
output RF is
switch off 0:
closed 1: opened
1.3.6.1.4.1.21678.188.7.9.2 ark1t_Opto1Status R
Opto 1 status
(Mode Switch): if
closed Mode B,
otherwise Mode A
0: closed 1:
opened