User's Manual Part 3

Screen Service SDT 501 UB-C ARK 1-T Operations
May, 2010 v 1.0 Page 3 - 146
OID Name R/W Description
Gbe Channel 1 7:
Gbe Channel 2 8:
Seamless HP
1.3.6.1.4.1.21678.188.6.1.4.2 ark1t_InputToAsiOutLP RW
Input to ASI output
LP selector 0:
asi 1 1: asi 2 2:
asi 3 3: asi 4 6:
Gbe Channel 1 7:
Gbe Channel 2 8:
Seamless LP
1.3.6.1.4.1.21678.188.6.2 ark1t_OutputRf
1.3.6.1.4.1.21678.188.6.2.1 ark1t_RfOn RW
RF output enable
0: disabled 1:
enabled
1.3.6.1.4.1.21678.188.6.2.2 ark1t_RfStatus R
RF output status
0: off 1: on
1.3.6.1.4.1.21678.188.6.2.3 ark1t_RfPrecCurveMode R
Pre-correction
curve editing
status 0: auto 1:
manual
1.3.6.1.4.1.21678.188.6.2.4 ark1t_RfPrecCurvePort5kStatus R
Port 5000 status
0: closed 1:
opened
1.3.6.1.4.1.21678.188.6.2.5 ark1t_RfPrecCurveActualNumber R
Current pre-
correction curve
number
1.3.6.1.4.1.21678.188.6.2.6 ark1t_RfManualCurveSet RW
Sets the
precorrection
curve number
when the device is
in Driver mode
0...6: Curve
number from 1 up
to 7 255: Flat
curve
1.3.6.1.4.1.21678.188.6.3 ark1t_OutputTest
1.3.6.1.4.1.21678.188.6.3.1 ark1t_TestCw RW
Test CW 0:
disabled 1:
enabled
1.3.6.1.4.1.21678.188.6.3.2 ark1t_Test_Dvb
1.3.6.1.4.1.21678.188.6.3.2.1 ark1t_TestHole RW
Test Hole 0:
disabled 1:
enabled
1.3.6.1.4.1.21678.188.6.3.2.2 ark1t_TestForceNullPck RW
Force null packets
0: disabled 1:
enabled
1.3.6.1.4.1.21678.188.6.3.3 ark1t_Test_Itu
1.3.6.1.4.1.21678.188.6.3.3.1 ark1t_Test_Cw_Av RW
Test CW A/V
enable 0:
disabled 1:
enabled
1.3.6.1.4.1.21678.188.6.3.3.2 ark1t_Test_Video RW
Test video selector
0: bars 1: no
video test
1.3.6.1.4.1.21678.188.6.3.3.3 ark1t_Test_Audio RW
Test audio
selector 0: no
audio test 1: test
tone
1.3.6.1.4.1.21678.188.6.3.3.4 ark1t_Test_Tone_Right RW
Right tone
frequency (range:0
to127) [unit x
100Hz]
1.3.6.1.4.1.21678.188.6.3.3.5 ark1t_Test_Tone_Left RW
Left tone
frequency (range:0
to127) [unit x