User's Manual Part 3

Screen Service SDT 501 UB-C ARK 1-T Operations
May, 2010 v 1.0 Page 3 - 140
OID Name R/W Description
detected
1.3.6.1.4.1.21678.188.4.1.2 ark1t_DetectLp R
Low priority MIP
detect 0: not
detected 1:
detected
1.3.6.1.4.1.21678.188.4.1.3 ark1t_PriorityError
1.3.6.1.4.1.21678.188.4.1.3.1 ark1t_PriorityErrorHP R
Priority error
indicator 0: good
priority, incoming
MIPs are HP 1:
priority error,
incoming MIPs are
not HP
1.3.6.1.4.1.21678.188.4.1.3.2 ark1t_PriorityErrorLP R
Priority error
indicator 0: good
priority, incoming
MIPs are LP 1:
priority error,
incoming MIPs are
not LP
1.3.6.1.4.1.21678.188.4.1.4 ark1t_CRCError
1.3.6.1.4.1.21678.188.4.1.4.1 ark1t_CRCErrorHP R
CRC error
indicator 0: the
CRC of incoming
HP MIP packets is
correct 1: the
CRC of incoming
HP MIP packets is
incorrect
1.3.6.1.4.1.21678.188.4.1.4.2 ark1t_CRCErrorLP R
CRC error
indicator 0: the
CRC of incoming
LP MIP packets is
correct 1: the
CRC of incoming
LP MIP packets is
incorrect
1.3.6.1.4.1.21678.188.4.1.5 ark1t_NetworkDelay
1.3.6.1.4.1.21678.188.4.1.5.1 ark1t_NetworkDelayHP R
Network Delay
error indicator 0:
Network Delay is
below the HP MIP
Max Delay 1:
Network Delay
exceeds the HP
MIP Max Delay
1.3.6.1.4.1.21678.188.4.1.5.2 ark1t_NetworkDelayLP R
Network Delay
error indicator 0:
Network Delay is
below the LP MIP
Max Delay 1:
Network Delay
exceeds the LP
MIP Max Delay
1.3.6.1.4.1.21678.188.4.2 ark1t_MipTxId
1.3.6.1.4.1.21678.188.4.2.1 ark1t_TxId RW
Transmitter
identifier (the
range is 0:65535)
1.3.6.1.4.1.21678.188.4.2.2 ark1t_TxId0Enable RW
TX ID 0 enable 0:
disabled 1:
enabled
1.3.6.1.4.1.21678.188.4.3 ark1t_MipConstallation R
MIP Constellation
0: QPSK 1: 16-
QAM 2: 64-QAM
1.3.6.1.4.1.21678.188.4.4 ark1t_MipInterleaver R MIP native/in-