User's Manual Part 3

Screen Service SDT 501 UB-C ARK 1-T Operations
May, 2010 v 1.0 Page 3 - 124
OID Name R/W Description
1.3.6.1.4.1.21678.188.1.10.6 ark1t_Amplifier R
Amplifier Serial
Number
1.3.6.1.4.1.21678.188.2 ark1t_Mode
1.3.6.1.4.1.21678.188.2.1 ark1t_ModeSwitch RW
Switch mode
selector
0:manual 1:auto
2:opto 3:time
1.3.6.1.4.1.21678.188.2.2 ark1t_ModeManualSelector RW
Manual mode 0:
modeA 1: modeB
1.3.6.1.4.1.21678.188.2.3 ark1t_ModeActual R
Actual mode 0:
modeA 1: modeB
1.3.6.1.4.1.21678.188.2.4 ark1t_ModeSelectorA RW
Mode A selector
0: Not used, 1: Not
used, 2: Tx Digital
3: Tx Analog
1.3.6.1.4.1.21678.188.2.5 ark1t_ModeSelectorB RW
Mode B selector
0: Not used, 1: Not
used, 2: Tx Digital
3: Tx Analog
1.3.6.1.4.1.21678.188.2.6 ark1t_ModeErrorFrequency R
NOT
IMPLEMENTED
Frequency error
correction
expressed in Hz
1.3.6.1.4.1.21678.188.2.7 ark1t_ModeAFC_A RW
NOT
IMPLEMENTED
Automatic
Frequency Control
mode A 0:
disabled 1:
enabled
1.3.6.1.4.1.21678.188.2.8 ark1t_ModeAFC_B RW
NOT
IMPLEMENTED
Automatic
Frequency Control
mode B 0:
disabled 1:
enabled
1.3.6.1.4.1.21678.188.2.9 ark1t_ModeAFC_actual R
NOT
IMPLEMENTED
Automatic
Frequency Control
status 0: disabled
1: enabled
1.3.6.1.4.1.21678.188.2.10 ark1t_ModeAutoSwitchTmo RW
Auto-switch
timeout (s). The
range is 0:255.
1.3.6.1.4.1.21678.188.2.11 ark1t_ModeActualTmo R
Actual auto-switch
timeout (s)
1.3.6.1.4.1.21678.188.2.12 ark1t_ModeAutoSwitchRuleA RW
Auto-switch rules
mode A (bit to
alarm association)
bit2: no input
alarm bit5: no
MIP alarm
1.3.6.1.4.1.21678.188.2.13 ark1t_ModeAutoSwitchRuleB RW
Auto-switch rules
mode B (bit to
alarm association)
bit2: no input
alarm bit5: no
MIP alarm
1.3.6.1.4.1.21678.188.2.14 ark1t_ModeSwitchingTime
1.3.6.1.4.1.21678.188.2.14.1 ark1t_SwitchingTimeYear RW
Switching time:
year setting
(starting from