User's Manual Part 3

Screen Service SDT 501 UB-C ARK 1-T Operations
May, 2010 v 1.0 Page 3 - 110
3.9.4 System Initialization Event
At every system initialization the event System Init is generated.
This event is followed by 25 bytes specifying type and specific code of errors occurred
during system initialization.
Each byte refers to an error as described in the following table:
Table 17. Init system event specific data
Byte
Description Errors code
1°
FS_ERR
File System error.
• 0x00: File System ok.
• 0x01: FS partition error (invalid FS).
2°
INFO_ERR
*.cfg file error.
• 0x00: File ok.
• 0x01: File not found or File open error.
• 0x02…0x03: Invalid file (syntax errors).
3°
DEF_ERR
*.def file error.
• 0x00: File ok.
• 0x01: File open error.
• 0x02: File not found.
4°
LCD_ERR
LCD error.
• 0x00: LCD ok.
• 0x01: LCD not found.
5°
PLL_960M_ERR
960 MHz PLL error.
• 0x00: PLL locked.
• 0x01: PLL not locked