User`s manual

Chapter 9 - SETUP PART 7: Print Head Alignments - BLAZER PRO
76
T-Jet Blazer Series User’s Manual
off. For an example, the cyan set may be off to the right (enter 9s) and the magenta off to the left
(enter 1s), while the yellow may be perfect (enter 5s). Completing the “estimation” process too
many times can “over shoot” the alignment causing it to be off the opposite way. If the pattern is
only slightly off (half of what you see in this example) only two entries may be necessary.
Continue on to • Step 4 - Final Printout and Calibration.
3. Entering in Values - Part 2 - Bi-Directional
Below is an example printout of a Bi-Directional Alignment pattern (Figure 3). Throughout the process
of selecting the best values, for this example we will use a chart (Figure 4) to keep track of the selections
and entries made to help you understand how the process is completed. Figures 1 and 2, in the earlier
section - Step 3 - Entering Values - Part 1, covers the process of entering Uni-Directional data.
Figure 3: Bi-Directional Alignment Printout