User`s manual

Chapter 9 - SETUP PART 7: Print Head Alignments - BLAZER PRO

Version 5.5 Revised December, 2008

IMPORTANT NOTE: If you notice SEVERE registration issues, we

recommend you perform the Uni-Directional Alignment rst, followed by a Bi-

Directional Alignment. If you only wish to ne tune printer output, you can utilize

the Bi-Directional Alignment as a standalone procedure.

Select All of the Dot Size #s and complete other settings.6.

• Within the Bi-Directional or Uni-Directional Alignment screens, place a check mark in all three of

the Dot Size check boxes, under Dot Size.

Next, select Other for Media Type•

Enter 2 for Paper Thickness•

Select Standard from the Platen Gap drop-down menu. •

DO NOT modify any of the

numbers in the boxes yet.