User`s manual

Chapter 9 - SETUP PART 7: Print Head Alignments - BLAZER PRO
70
T-Jet Blazer Series User’s Manual
2. From the main Window, select your printer from the drop down menu.
Use the table below to determine your
Epson print engine model. Your Serial
Number will contain one of the four
options after TJBE. The table will then
outline which model your print engine is
based on.
Next, select Media Adjustment from the list of icons in the Remote Panel window. 3.
NOTE: If you were performing a Power Cleaning or a Nozzle Check from the LFP Panel you would
select Power Cleaning.
WARNING: DO NOT change any values or run any Utilities other than those
specied in this Manual. Your Blazer Series printer is a highly modied version of
the Epson 4800/4880 and several custom settings were implemented at the factory
level. If you modify any preset values, it may result in signicant downtime and/or
additional expense.
4. From the Media Adjustment screen
select the Auto Adjustment icon.
In the Auto Adjustment section of the 5.
Media Adjustment window, select
Bi-Directional or Uni-Directional
Alignment from the drop down menu.
This selection will be determined in the
earlier section of this chapter named
“Types of Print Head Alignments and
Which to Complete”.
NOTE: DO NOT select any of the Auto
Alignment options (in blue) on this
screen.
BO: EPSON Stylus Pro 4800
BX: EPSON Stylus Pro 4800
B8: EPSON Stylus Pro 4880
BY: EPSON Stylus Pro 4880