User`s manual

Chapter 9 - SETUP PART 7: Print Head Alignments - BLAZER EXPRESS
57
Version 5.5 Revised December, 2008
4. From the Media Adjustment screen select
the Auto Adjustment icon.
In the Auto Adjustment section of the Media 5.
Adjustment window, select Bi-Directional or
Uni-Directional Alignment from the drop down
menu. This selection will be determined in the
earlier section of this chapter named “Types of
Print Head Alignments and Which to Complete”.
NOTE: DO NOT select any of the Auto Alignment
options (in blue) on this screen.
IMPORTANT NOTE: If you
notice SEVERE registration issues,
we recommend you perform the Uni-Directional Alignment rst, followed by a
Bi-Directional Alignment. If you only wish to ne tune printer output, you can
utilize the Bi-Directional Alignment as a standalone procedure.
Select Dot Size in the Alignment Window.6.
Within the Bi-Directional or Uni-Directional Alignment screens, place a check mark in the •
rst of the three boxes ONLY, below Dot Size. You will have to repeat the entire process two
ADDITIONAL times, placing check marks in Dot Size 2 the second time and Dot Size 3 the third.
DO NOT modify
any of the numbers
in the boxes yet.