User`s manual
Chapter 9 - SETUP PART 7: Print Head Alignments - BLAZER EXPRESS
56
T-Jet Blazer Series User’s Manual
3. Send the Alignment Test Print
The following steps will cover sending the Print Head Alignment Test Print to the Blazer EXPRESS
through the Epson LFP Remote Panel.
1. Open the LFP Remote Panel by double-clicking on the Epson LFP
icon on your Desktop.
If not present, using your Start menu, select Programs > Epson > Epson LFP Remote
Panel.
2. From the main Window, select your printer from the drop down menu.
Use the table below to determine your
Epson print engine model. Your Serial
Number will contain one of the four
options after TJBE or TJB. The table will
then outline which model your print
engine is based on.
Next, select Media Adjustment from the list of icons in the Remote Panel window. 3.
NOTE: If you were performing a Power Cleaning or a Nozzle Check from the LFP Panel you would
select Power Cleaning.
WARNING: DO NOT change any values or run any Utilities other than those
specied in this Manual. Your Blazer Series printer is a highly modied version of
the Epson 4800/4880 and several custom settings were implemented at the factory
level. If you modify any preset values, it may result in signicant downtime and/or
additional expense.
BO: EPSON Stylus Pro 4800
BX: EPSON Stylus Pro 4800
B8: EPSON Stylus Pro 4880
BY: EPSON Stylus Pro 4880