User`s manual

Chapter 9 - SETUP PART 7: Print Head Alignments - BLAZER EXPRESS

T-Jet Blazer Series User’s Manual

BLAZER EXPRESS ALIGNMENTS

This section will cover the execution

of Uni-Directional and Bi-Directional

Print Head Alignments for the Blazer

EXPRESS. For steps on completing these

alignments for the Blazer PRO, refer to the

later section of this chapter named Blazer

PRO Alignments.

1. Install the LFP Remote Panel

The alignment procedure is completed by using the Epson LFP Remote Panel. The LFP Remote Panel is

a stand alone application designed to give you several utility functions, including the Nozzle Check and

Power Cleaning utilities, right from your computer. The LFP Remote Panel is included with the Epson

Stylus Pro Driver CD that came with your Blazer Series printer.

Download On Web

The LFP Remote Panel is also available to download from Epson’s website: www.epson.com. Select

Drivers & Support, then select the applicable version for the Stylus Pro based on the Operating System

(Windows XP, Vista, 2000 or MAC).

To determine which Epson Print Engine your printer is equipped with, locate the printer serial number and

compare it to the following table.

If your Serial Number contains the following as the 5th and 6th

digits after TJBE. Download the latest LFP Remote Panel for

your particular model.

2. Printer Setup

To continue the Print Head Alignment procedure, you must have the Epson LFP Remote Panel installed

and the computer connected to the printer. The printer must be in “Ready/ROLL” mode and be in the

Index Position with the lm or other media (to print on) in place. If the printer is not in the correct mode,

you will receive a “Communication Failed” error. You will also need to determine the Print Head height

that you will use permanently while printing.

Power up the printer (if not powered up already).1.

Check the distance between the Print Head and the 2. Shirt Board.

The Shirt Board must have the media in place (whether it be lm, paper or plexi-glass) to print the

BO: EPSON Stylus Pro 4800

BX: EPSON Stylus Pro 4800

B8: EPSON Stylus Pro 4880

BY: EPSON Stylus Pro 4880