User`s manual

Chapter 8 - SETUP PART 6: Initialization Utilities
50
T-Jet Blazer Series User’s Manual
3. From the main Window, select your printer from the drop down menu.
Use the table below to determine your
Epson print engine model.
BO: EPSON Stylus Pro 4800
BX: EPSON Stylus Pro 4800
B8: EPSON Stylus Pro 4880
BY: EPSON Stylus Pro 4880
Your Serial Number will contain one of
the four options after TJBE or TJB. The
table will then outline which model your
print engine is based on.
Select Power Cleaning from the LFP 4.
Remote Panel Main Screen.
5. Within the next screen, select your
printer from the drop-down menu.
Click on the desired function. 6.
NOTE: A Power Cleaning consumes
a large volume of ink. For daily
cleanings use the Head Cleaning
function. For more information
on the Power Cleaning and Head
Cleaning Utilities, refer to those
sections earlier in this chapter.
When the procedure is complete, 7.
click Exit.
If the Nozzle Check does not print correctly, perform a regular Head Cleaning. See Performing a
Head Cleaning earlier in this chapter and repeat the Nozzle Check Process if needed.
IMPORTANT NOTE:
If, AT ANY TIME, you have performed three consecutive Nozzle Checks without
rebooting your printer, you must power OFF your printer before executing another
one.