User`s manual

Chapter 5 - SETUP PART 3: Interacting with the Blazer PRO
22
T-Jet Blazer Series User’s Manual
Overview of Printer Connections
Plugging the Unit into AC Power
Plug the printer into its own power source. The T-Jet Blazer Pro has a dual voltage power converter built
in, allowing it to work with 50 or 60 cycle current, ranging from 110 volts to 220 volts.
Insert the AC cord into the back of the printer (see above photo) and plug the opposite end into a power
strip with surge protection. Avoid plugging multiple items into the same power strip.
For more reliable results, plug the printer into a UPS (Uninterrupted Power Supply) to help prevent power
uctuations while printing. DO NOT plug other high power use items, such as a Heat Press, into the same
circuit.
Circuit Breaker/
Power Switch
AC Power Cord USB Cable
Connection
Printer Bed
Power Cord
DO NOT
UNPLUG!!!
UI Serial Port
Connection
ON
OFF