User`s manual

Chapter 17 - Product Support
182
T-Jet Blazer Series User’s Manual
Step 5: Attach the first side plate wall.
Attach the rst wall using 4 screws that will fasten
into the bottom of the crate and 2 screws that will
fasten to each vertical bracer.
NOTE: It
will help
to have an
assistant
hold the
side plate
wall in
place while
fastening.
Step 6: Attach the front/ back plate wall.
Attach the front/back plate to the side plate using 3 screws.
Next, fasten the bottom left side of the front/back
wall with a screw going directly into the crate
bottom.
NOTE: Keep this screw at least 3 - 4 inches from the edge so that the screws will not hit the other in later steps.