User`s manual

Chapter 12 - Advanced Printing With White Ink
122
T-Jet Blazer Series User’s Manual
Solution 5:
The Print Head is permanently clogged or damaged from lack of maintenance. Before contacting us for
a replacement or for other instructions, check the print head to see if there is any visible ink or lint stuck
to it. If so, use FastINK HD Cleaning Solution or Windex on a sponge swab and CAREFULLY wipe the
bottom of the Print Head in one direction with VERY LITTLE PRESSURE. The print nozzles are very
sensitive and can be damaged very easily. This procedure should only be completed as a last resort to
replacement. Flip the alcohol pad and repeat the process.
NOTE: You will need to release the Print Carriage and move the print head to the middle of the machine
to gain access to it.