User`s manual
At this point, you MUST turn OFF the printer. You CANNOT print or
perform any additional maintenance routines on your machine
without powering OFF your printer upon completion of a Head
Alignment. You do not need to perform a complete shut
down- turning OFF the power by using the UI is sufcient.
After your printer has completed its shutdown cycle, your may turn it back
ON and either begin printing or perform another Head Alignment to check
the results of your previous calibrations. Keep in mind, you may be required to
perform 2-3 Head Alignment procedures to initially calibrate your machine for
printing.
If you perform another Head Alignment, you will again be required
to choose and enter the best lines and color swatches from each
group. You CANNOT exit early from this routine. If you do no wish
to make any further changes, just accept the default values (by
pressing the Enter key) as they appear in the LCD Display until the
routine is complete.
For additional information on the UI Screens, using the Epson LFP
Remote Panel or Setting the Platen Height, please refer to your Fast
T-Jet Blazer User’s Manual.
Print Head Replacement
In the event that the Print Head strikes a garment, Shirtboard or other object, the
Print Head will probably need to be replaced. If you leave the printer
unattended for long periods of time, a serious clog may result and the Print
Head will probably need to be replaced.
Replacing the Print Head takes less than 30 minutes and there is an instructional
video available online at www.screenprinters.net. You can also download an
Installation Guide in PDF format for reference. Replacement Print Heads are
available from U.S. Screen Print and Inkjet Technology or possibly your dealer.
If you are dependent upon your Fast T-Jet Blazer and cannot afford to be down
for a few days, we recommend keeping a replacement Print Head in stock.
Print Heads are not covered by your Warranty except in case of
Manufacturer’s Defect. If your Print Head is damaged as the result
of a Head Strike or it becomes permanently clogged by ink due
to a lack of maintenance, you will be responsible for the cost of
replacement, to include shipping charges.
18
Fast T-Jet Blazer Maintenance Manual