User`s manual
• 12 additional vertical lines numbered 1-9
• 12 Swatches for the 4 White nozzles labeled (Lk), (Lc), (Lm) and (LLk) and
numbered 1-9
Each group will be identied by a number (1-3) and the designation PK/
MK. You will notice that there are two columns of identical groups. The
rst, or left hand column, will be used for calibration. The second column is
only a duplicate image of the rst column.
The LCD Display will read “#1 PK *5.” This refers to the rst set of vertical
lines (MK which refers to Black) numbered 1-9 in the rst group. Carefully
examine the printed lines and determine the cleanest/straightest line.
Using the UP or DOWN arrow, cycle through the numbers 1-9 until it
corresponds to the best line you have selected. Press the Enter key.
An asterisk (*) will appear in front of the number you have selected and
then the LCD Display will read “#1 PK C *5.” The “C” in this next menu item
refers to the Cyan color swatch. Examine the Cyan swatches and select
the one closest to a perfect rectangle with no gaps or breaks in color. On
the LCD Display, use the UP or DOWN arrow to cycle through the numbers
1-9 until it corresponds with the best rectangle you have selected. Press
the Enter key.
An asterisk (*) will appear in front of the number you have selected and
then the LCD Display will read “#1 PK M *5.” You must repeat the process
of selecting the best line and rectangle for each set of colors and lines in
all three groups before you have completed the Head Alignment process.
When the process is complete, the LCD Display will return to the main 18.
“Alignment Manual” menu or “Ready” status.
These patterns will
be White when
using White ink
These patterns will
be White when
using White ink
17
Utilities to Improve Print Quality