User`s manual

Kill Switch

As a precaution, your Fast T-Jet Blazer Pro is equipped with a Kill Switch in both

the Home and Index positions. These circuit breakers will only be activated if the

PrinterAssemblyattemptstoexceedspecicprintingdimensions.Theseswitches

alsopreventdamagetoyourmachineshouldtheAssemblyfailtotripspecic

sensors.

In the event you experience a sudden and total loss of power to all systems,

including the User Interface, it may be due to a Kill Switch activation. To reset

your system please do the following:

TurnOFFpowertoyourmachinebyippingthebreakerswitchlocated1.

next to the AC power cord. If you do not turn OFF the breaker, the Printer

Assembly may immediately activate the Kill Switch again after reset.

Move the Printer Assembly 3-4” toward the center of the Platen.2.

Reboot your system and power ON your printer.3.

Should you experience a Kill Switch activation, all spooled les and

print jobs must be reloaded and again sent to Print.

Production Rates and Ink Costs

A Production and Cost matrix is available at www.screenprinters.net > Support >

Blazer Pro > Downloads.

Chapter 6- Printing with the Fast T-Jet Blazer

Pro