User`s manual

Eight Color Print Modes

The Fast T-Jet Blazer Pro also supports Eight Color Print Modes that utilize the

additional colors of Red, Green, Blue and Orange in place of the four White

cartridges.Thiscongurationofinkscannotbeusedtoprintondarkgarments,

however when printed on light garments, the additional colors create vibrant

huesthataddanexcitingdimensionalitytoyournaloutput.

The Eight Color Bulk Ink System is an optional conguration. If your

printer is not equipped with the necessary inks and cartridges, you

may purchase the additional accessories from U.S. Screen Print

& Inkjet Technology. Refer to Chapter 7 of your FastARTIST User’s

Manual for details on ink cartridge placement.

Underbase Print Modes

These Underbase Print Modes may only be selected from within FastARTIST. With

Cartoon and Photo Print Modes available in three different resolutions, you have

the ability to select the proper mode to match your graphic image. For dark

shirts try using the 1440 DPI Print Mode to achieve a stronger, more consistent

Underbase. This is due to the fact that the higher resolution will dispense more ink

at a slower speed, creating an extremely even coverage. If you are printing on

lighter colored shirts, it may not be necessary to print such a strong Underbase-

720 DPI may work better.

For a complete list of the various CMYK, Eight Color and Underbase Print Modes

available, please refer to Chapter 7 of your FastARTIST User’s Manual.

When a Printing Job Is Finished

AfteryourFastT-JetBlazerPronishesprinting,the

Printer Assembly will return to the Home position

and the two green buttons on the UI will light up

andstarttoash.

Extend the printer so that the third position

Shirtboard is completely clear of the Printer

Assembly.

Remove your garment(s) and cure them. •

Load your next garment(s) and resume •

printing.

Chapter 6- Printing with the Fast T-Jet Blazer

Pro