User`s manual

Important Point

FastARTIST refers to its page dimensions in terms of width and “height.” For

purposes of printing a two-dimensional image on a garment or non-textile item,

be aware of the fact that “height” means the same thing as “length.”

FastARTIST Page Size – Go to Layout > Page Size

FastRIP Setup – Within FastARTIST go to File > FastRIP Setup

You can Open a template and then Import

each graphic into the correct print location

based on the grid lines that represent an

outline of each Shirtboard. The template has

either a yellow or a pink placeholder to show

you the size of the graphic. (Click on a block

of color to delete it.)

FastARTIST has pre-loaded templates of 13”

x 16” (standard) or 16” x 20” (oversized ) to

match the Shirtboard sizes. If you are creating

images in Photoshop or another graphics

application, make sure you create Page Sizes

thatreectthesedimensions.

When you open the Template, keep in mind printing speed when

importing graphics. You can also place graphics sideways in a

template and load the shirt sideways.

Select the appropriate Print Mode. There are a wide variety of Print Modes 6.

availablewithinFastRIPbecausetheygiveyoutheexibilitytoprinthigh

resolution photo quality images at a slower speed or lower resolution Spot

Color images at faster speeds.

All designs are different and each has different needs.

Fast T-Jet Blazer Pro User’s Manual