User`s manual

Perform a Nozzle Check

You must print a Nozzle Check to ensure the Print

Head is performing properly. You may use either

paperorlmforthistest,butwerecommendlmsuch

as FastPOSITIVE, available from U.S. Screen. Otherwise

it’sdifculttoseeWhiteinkonWhitepaper.Toinitiate

a Nozzle Check:

Take the printer from 1. Print to “Ready (Sheet)” status by pressing the LEFT

arrow button twice. The LCD display will read “Ready” and you will see a

“sheet of paper” icon. Only when in “Ready (Sheet)” status can the Printer

Assembly be moved.

Usingthe“RIGHThand”button,shufethroughtheUIscreensuntilyougetto2.

the Mode Select screen. Ensure the virtual dial is set to Manual.

Press the “RIGHT hand” button on the UI again until you reach the 3. Manual

Mechanism Movement Utility (MMMU) screen.

Placeyoursheetoflmorpaperonthe4. rstShirtboard.Therstpositionis

furthestfromtheUIandpowercables.Takecaretoalignthelmorpaper 

with the Shirtboard’s lower right hand corner (as you face the front of the

printer.)

Under the heading 5. Position, press the Index button. This will advance the

Printer Assembly to the beginning of the Platen. Using the Rev button, position

the Printer Assembly over the medium onto which you will print the Nozzle

Check.

You must now change the printer mode to “Ready (Roll).” Press the LEFT 6.

arrow button on the LCD Control Panel twice. The display will read “Ready”

with a “roll of paper” icon.

On Control Panel, press the RIGHT arrow once and the display will read 7.

“Printer Setup.” Press the DOWN arrow once to see “Test Print.”

Press the RIGHT arrow button once to see “Nozzle Check.” Press the RIGHT 8.

arrow again and “Print” will appear in the display.

To execute the Nozzle Check, press the RIGHT arrow button once.9.

If the • Nozzle Check does not print correctly, perform a regular Head

Cleaning. This is done by holding down the RIGHT arrow button for 3

seconds. After the Head Cleaning has been completed, execute another

Nozzle Check.

Fast T-Jet Blazer Pro User’s Manual