User`s manual

it is shipped with cleaning cartridges. You will need to remove these prior to use
because these cartridges do NOT contain textile ink.
To remove the cleaning cartridges, locate the blue levers to the right side
of each bank of four. Moving these levers to the UP position will release the
cartridges. With the lever in the DOWN position, cartridges will be locked in
place.
Move both levers to the UP position and remove the cleaning cartridges. Store
them in a cool, dark environment for future use.
Filling the Bulk Ink Cartridges
During initial setup, and whenever
your ink cartridges begin to run low,
youwillhavetollthemmanually.
Choose an area where spills will not
do much damage and protect the
area with newspaper, paper towels or
a drop cloth. It is recommended you
also wear disposable gloves.
Your printer comes with 8 oz. (250 ml) bottles
of Cyan, Magenta, Yellow and Black FastINK3,
along with 1 liter of FastINK White. You will also
nd8continuousowinkcartridgesand8
funnels. 1 cartridge will be used for each of the
4 colors and 4 cartridges will be dedicated for
White.
Tollacartridge,refertothecolorcodingon
the cartridge for the correct ink to add, then
remove the cap and place the funnel into the
top opening. When pouring the ink, lift the funnel
out of the hole slightly, to allow air to escape and
facilitateasmoothow.
DONOToverllthecartridge.Therearehash
The Bulk System that shipped with your Fast
T-Jet Blazer Pro may or may not look exactly
like the one shown here.
14
Fast T-Jet Blazer Pro User’s Manual