User`s manual

Overview of Printer Connections
Environmental Controls and Humidity
TheFastT-JetBlazerProshouldnotbeexposedtodirectsunlight,directairow,
dusty areas, any strong magnetic forces or excessively high humidity. The
machine does not like to be too dry or too moist with a level of 40% to 80%
relativehumiditybeingideal.SinceyouwillbehandlingwetinktorelltheBulk
Systeminkbottles,youshouldalsoprotectanycarpetoroorcoveringwith
mats.
Ensure the entire printer base is sitting on a level, stable surface to support the
weight of the machine. This means all ground support feet must be safely on the
same support surface.
Like any Hi-Tech electronic device, your inkjet printer does NOT like being in
a hot or cold shop or a garage without proper air-conditioning controls. If
left unattended for days or weeks in a hot dry environment, the Print Head
WILL clog. Consult Chapter 10forinstructionsoninstallingrellablecleaning
cartridges if you anticipate not using your machine for an extended period.
Forconvenienceandefciency,placeyourFastT-JetBlazerProclosetothe
Heat Press or Conveyor Dryer you will be using to cure the ink. If you have two or
three printers set up as a production work station, arrange them around or near
10
Fast T-Jet Blazer Pro User’s Manual