User`s manual

Fast T-Jet Blazer Pro User’s Manual
114
setup and operation of the Fast T-Jet Blazer Pro Inkjet-to-Garment printer. U.S.
Screen makes no representation to have researched, or to have knowledge of,
individual Federal, State or local regulations or standards and, as such, cannot
accept any liability for lack of compliance with such Federal, State and local
laws, regulations and standards on the part of a Customer.
It is the Customer’s responsibility to ensure that the room and equipment
exhaust,makeupairsupply,ooring,air,water,wasteandelectricalservices
meet all applicable codes and ordinances. The User should not assume that
all necessary procedures, warnings and precautionary measures are discussed
or that additional measures may not be required or desirable because of the
particular or exceptional conditions or circumstances present in the User’s work
area or because of the requirements of applicable Federal, State and local
laws, regulations and standards.
Any questions regarding these instructions should be brought to the attention of
a U.S. Screen Representative.
Summary of Customer Responsibilities
The Customer must:
Provide an area that meets the requirements described in this Manual. The
Fast T-Jet Blazer Pro inkjet printer requires a minimum area of 12 ft x 10 ft (3.6 m
x 3.6 m) for the printer and surrounding work space. Additional areas/rooms
are required for drying, pretreating garments, garment staging and garment
storage.
Employqualied,skilledtradespersons(i.e.,electricians,carpenters,riggers)for
anysitemodicationsornewconstructionandinstallationofallutilities.
Provide any additional equipment that may not be supplied by U.S. Screen, but
will be essential to the use of the Fast T-Jet Blazer Pro and the printing process.
Examples of this equipment are:
A Windows compatible PC computer with at least 1MB of RAM, a •
Pentium 4- 1.8 GHz processor and USB2 connectivity
A Pretreatment application area that is not near the printer•
A Heat Press or conveyor dryer for shirt Pretreatment and curing. A Heat Press •
is preferable for Pretreatment application and drying when printing on Dark
shirts with White ink.