User`s manual
Chapter 8 - Initialization Utilities
51
BLAZER EXPRESS Alignment Procedures
Whether you are performing the Initial Setup or correcting minor printing concerns, the following steps
are necessary to perform a Print Head alignment for your T-Jet Blazer EXPRESS. If completing the
Head Alignment process for the initial setup, also see the later section - Quick Alignment (Optional).
You will be able to save time with this option.
1. Open the LFP Remote Panel by double-clicking on the Epson LFP
icon on your Desktop or go to Start > Programs > Epson > Epson LFP Remote Panel.
2. From the main Epson LFP Remot Panel
Window, select your printer from the drop
down menu (Epson Stylus Pro 4800 or
4880 - see scale in Chapter 6 - Printer
Driver Installation to determine correct
model).
Next, select Media Adjustment from the
3.
list of icons. If you were performing a
Power Cleaning or a Nozzle Check from
the LFP Panel you would select Power
Cleaning.
WARNING: DO NOT change any values or run any Utilities other than those
specied in this Manual. Your Blazer Series printer is a highly modied version of
the Epson 4800/4880 and several custom settings were implemented at the factory
level. If you modify any preset values, it may result in signicant downtime and/or
additional expense.
4. The next window that opens is called the Media
Adjustment Screen. From the Media Adjustment
screen select the Auto Adjustment icon.