User`s manual

29
Chapter 7
Learning the LCD and
User Interface Controls
Whether it’s a Head Cleaning, Nozzle Check, Head Alignment or other maintenance, all Utilities can
be accessed through the LCD Display Control Panel, located above the white ink cartridges. The LCD
Dispay Control Panel is also used to pause and reset print jobs.
About the LCD Display
Many of the different T-Jet Blazer Series
Printer Modes (not to be confused with
Print Modes which are applicable only to
image output) are commonly referred to
by the Icons and Phrases that appear in
the LCD Display. Because of the complex
nature of the Epson 4880, there are many
different Modes and Functions available,
therefore the following list is not all-
inclusive. However, it does detail the major
items you may encounter in daily operation
and those which are applicable to Inkjet-to-
Garment printing. For a comprehensive list of all Epson 4880 Functions and Modes, consult the Epson
User’s Manual that has been included as part of your printer kit.)
The LCD Display Buttons
Your LCD display button layout may look different than the image below, but the button layout will apply
to all versions of the Blazer Express and PRO.
Service Only Button
This button should not be used unless instructed by one of our technical support representatives. The
default setting is set to the off (out) position and needs to remain that way.
Pause Button
Pressing the Pause Button will pause a print job while printing. Holding down the Pause Button for 3
seconds will cancel a print job.
Blazer Express LCD Display and buttons