User`s manual

T-Jet Blazer Series User’s Manual
Version 5.0 Revised September, 2008
16
the Reset Module to change its status. The module’s Red light will blink while it resets the chip. The Red
light will transition to a SOLID Green when the reset is complete.
The process of resetting the smart chip is demonstrated in the following three images.
The light on the chip resetter will be solid green when reset is complete.
There are currently 2 types of chip resetters. The second resetter is white and is used the same way as the
blue. The only difference is the light on the white resetter will blink red while resetting and will shut off
when complete.
NOTE: Resetting your Waste Ink Tank is done the same way. Refer to Chapter 13 - Daily, Weekly and
Monthly Maintenance for instructions on removing the Waste Ink Tank.
Non-Genuine Epson Cartridge Message
You may get a message reading “Non-Genuine Epson Cartridge”
on the LCD display panel. This message means that the printer
thinks the ink cartridge is empty and needs to be replaced. To
clear this message refer to Chapter 15 - Troubleshooting.
NON-GENUINE EPSON CARTRIDGE