User`s manual

T-Jet Blazer Series User’s Manual
Version 5.0 Revised September, 2008
178
Electrical: 110 - 240v AC 60/cycle 4 amps.
Computer Connection: USB 2.0
Additional Machinery:
Heat press/dryer, powerful PC computer for FastARTIST and FastRIP
Print Resolutions: 2880 x 1440dpi; 1440 x 720dpi; 720 x 720dpi; 360 x 360dpi
Maximum Printable Surface:
Blazer Express: 16” x 20” (41 x 51cm)
Blazer PRO: 17” x 45” (43 x 119cm)
Room Conditions: The printer requires a clean, dust-free room at constant temperature between 68° F
and 85° F (20°C and 29°C), with a relative humidity between 40% to 80% (non-condensing). Operation
of the printer at humidity below 40% or at above or below the recommended temperature range will result
in poor Print Nozzle performance and poor image quality.
Noise level of the equipment: Average 72 dBA; peak 78 dBA.
Equipment transportation and storage range: 40°
F to 120° F (5° C to 55° C).
Unit is mounted on lockable, leveling casters to facilitate location placement.
Miscellaneous Information
Shipping and Receiving
U.S. Screen will ship the machines and components via a common ground carrier of their choice unless
otherwise specied by the Customer. Shipment will be FOB Tempe, Arizona. This means the Customer
will pay for all freight charges, insurance, special delivery needs (home delivery) and the unloading of the
machine upon delivery.
Receiving Inspection
Inspect the crates and cartons for any damage. If possible, do this with the delivery carrier’s agent present.
Photograph any damage and immediately le a claim with the carrier. Carriers cannot be held legally
responsible for shipping damage unless they are notied within 15 days of delivery.
Shipment Movement
Use appropriate personnel and equipment to move the equipment from the transportation truck to the
receiving area to the staging area. The Fast T-Jet Blazer Express cannot pass unobstructed through
doorways or passages of less then 60”(153 cm). Movement through narrower portals will require tilting
or re-orientation of the printer. Ensure all loose product, materials and accessories are securely packed or
transported separately. Verify that elevators or other lifting devices will hold the weight of the equipment
(300 lb./ 136 kg crated).
Common carriers are NOT required to unload shipments over 100 lb. (45 kg). You must be prepared to