User`s manual

T-Jet Blazer Series User’s Manual
Version 5.0 Revised September, 2008
174
lack of compliance with such Federal, State and local laws, regulations and standards on the part of a
Customer.
It is the Customer’s responsibility to ensure that the room and equipment
exhaust, makeup air supply, ooring, air, water, waste and electrical services meet all applicable codes
and ordinances. The User should not assume that all necessary procedures, warnings and precautionary
measures are discussed or that additional measures may not be required or desirable because of the
particular or exceptional conditions or circumstances present in the User’s work area or because of the
requirements of applicable Federal, State and local laws, regulations and standards.
Any questions regarding these instructions should be brought to the attention of a U.S. Screen
Representative.
Summary of Customer Responsibilities
The Customer must:
1. Provide an area that meets the requirements described in this Manual.
The Blazer Express model requires a minimum area of 3.5 ft x 5.25 ft (1 m x 1.6 m) for the printer and
surrounding work space.
The Blazer PRO model requires a minimum area of 12 ft x 10 ft (3.65 m x 3 m) for the printer and
surrounding work space.
Additional areas/rooms are required for drying, pretreating garments, garment staging and garment
storage.
2. Employ qualied, skilled trades persons (i.e., electricians, carpenters, riggers) for any site modications
or new construction and installation of all utilities.
3. Provide any additional equipment that may not be supplied by U.S. Screen, but will be essential to the
use of the Fast T-Jet Blazer Express and the printing process.
Examples of this equipment are:
A Windows compatible PC computer with at least 1MB of RAM, a
•
Pentium 4- 1.8 GHz processor and USB2 connectivity
A Pretreatment application area that is not near the printer
•
A Heat Press or conveyor dryer for shirt Pretreatment and curing. A Heat Press is preferable for •
Pretreatment application and drying when printing on Dark shirts with White ink.