User`s manual

T-Jet Blazer Series User’s Manual
Version 5.0 Revised September, 2008
136
everything is set to Never be turned off except for the monitor; your monitor may still be set to turn
off whenever you would like.
Make sure you leave the printer and computer turned on and that
• FastRIP is open at all times.
Setting your computer to perform the Auto Head Cleaning Function does change the fact that you
still need to follow all other ink care procedures and practices, such as rotating.
Print Head Replacement
In the event that the Print Head strikes a garment, Shirtboard or other object, the Print Head may need to
be replaced. If you leave the printer unattended for long periods of time, a serious clog may result and the
Print Head will probably need to be replaced.
Replacing the Print Head takes less than 30 minutes and there is an instructional video available online
at www.screenprinters.net. You can also download an Installation Guide in PDF format for reference.
Replacement Print Heads are available from U.S. Screen Print and Inkjet Technology or possibly your
dealer and come with the installation guide.
If you are dependent upon your T-Jet Blazer Series Printer and cannot afford to be down for a few days,
we recommend keeping a replacement Print Head in stock.
See the instructional video online on replacing a print head. Refer to Chapter 16
- Product Support for information on logging on to our support site.