User`s manual

Chapter 14 - Tips and Utilities to Maximize Print Quality
135
Setup in FastRIP3.
• Click on the Queue pull down menu and select properties.
Select Printer status from the
•
left of the Queue Properties
Window.
Put a check mark in the Head
•
Clean check box.
Type
• in 8 in the rst box,
representing hours. This will
set the printer to run a head
cleaning every 8 hours.
Click OK.
•
4. Verify that the FastRIP Queue is running
The FastRIP Queue must be running in order for the Auto Head Cleaning Function to run.
The easiest way
• to verify this
is to make sure that the Stop
Queue icon is lit up. This
is the icon that looks like a
stack of papers with a stop
sign over it.
Setup Computer to Allow the Auto Head Cleaning Function
5.
Make sure that your computer is NOT setup to go into • Sleep Mode. If your computer goes into
sleep mode, it will disrupt the Auto Clean process.
To make adjustments or to check, right click on your desktop to get the Display Properties
window. Next, select the Screen Saver Tab and press the Power button towards the bottom of
the window. The Power Options Properties window opens and displays a list of several options.
Click the Power Schemes tab at the top if it is not selected already. You can make your preferred
selections below under the settings section and then click Save As to save as a custom scheme or
you can click the Schemes drop-down arrow and select Always On. Notice that in the settings area,